Flexo Solutions
flexo printing machine equipment

Digital Flexographic Plate 2.84mm

Digital Flexographic Plate 2.84mm

The structure of Flexographic Printing Plate DR284-II


1200mm × 2032mm

1067mm × 2032mm

1067mm × 1524mm

762 mm × 1016mm

Technical Specification of DR394-II

Type DR284-II
Plate thickness (mm) 2.84
Laser Ablation Energy (J/cm2 ) 3.2
Durometer (Shore A) 45-48
Relief depth (mm) 1.0-1.4
Image reproduction 2-98%
Maximum line (line/inch) 120
Minimm isolated line 0.15mm
Minimum isolated dot 0.25mm

Platemaking Data Recommended :

  • Back Exposure (sec): 25-35
  • Main Exposure (min): 12-18
  • Table Rinsing (min): 5-8
  • On-line Washer Rinsing (mm/min): 130-150
  • Drying (hrs): 1.5-2
  • Detackfying (min): 5-8
  • Post exposure (min): 5

Notice :
Calibration curve just similar to Flint Digital Flexo plate. The accurate data will be obtained in the next three month.

  • 1. All the above data is depended on the plate-making device in Huaguang.
  • 2. Due to the different requirements of plate-making device, UV lamp power, relief depth and print image, the above recommended time can be changed suitable.
  • 3. Customers should test on their own device for optimum plate quality